This Tech Note describes how to stream catman Live data with Microsoft® Power BI to share it with those you want to share it with.
This Tech Note describes how to use HBM's QuantumX or ruggedized SomatXR and software catmanAP for crash testing.
This Tech Note describes how to handle very slow sample rates (<1Hz), necessary, for example, for monitoring applications.
This Tech Note describes how to integrate the GOM Aramis system into a catman measurement.
Here, you will discover more about how to set up a data acquisition project and how to visualize and record data with catman. Start by watching the introduction video 'First Measurement - Step by Step' and continue to enhance your knowledge with our consecutive videos including, among others, Sensor Settings, Online Calculations, and Online Visualizations.
Here, you will discover more about the data view, data analysis and reporting with catman. Start by watching the introduction video 'First Steps in the Analysis Mode' and continue to enhance your knowledge with our consecutive videos, including among other, Calculations in the Analysis Mode and Reporting in Word.
Enhance your knowledge with our Tech Notes regarding:
This Tech Note describes how to handle very slow sample rates (<1Hz), necessary, for example, for monitoring applications.
This Tech Note describes how to integrate the GOM Aramis system into a catman measurement.
This Tech Note gives you an overview of how internal shunt calibration in the HBM DAQ family MGCplus works.
This Tech Note describes how the gauge factor influences the result and how to set up a strain gauge based Wheatstone bridge.
This Tech Note describes the Integration of QuantumX in Zwick Testing Machines.
This Tech Note describes how to integrate a weather concerning ambient conditions in structural monitoring of bridges, wind energy plants, buildings, or any other construction.
This Tech Note describes how to integrate the multi-component sensor into QuantumX and catman software from HBK.
This Tech Note describes how to connect and acquire data from RoaDyn / KiRoad Performance with the central Data Recorder CX22B from the QuantumX or SomatXR series.
This Tech Note describes how catman WebServer runs next to the main application on your PC, or your data recorder from the QuantumX or SomatXR series.
This Tech Note describes satellite-based position measurement in general and its value in mobile data acquisition and analysis with QuantumX, SomatXR, catman AP and nCodeDS.
This Tech Note shows the possibilities of WLAN in test and measurement, its advantages and challenges, and how it’s already used in real life applications.
This Tech Note describes how to stream catman Live data with Microsoft® Power BI to share it with those you want to share it with.
This TechNote describes how data acquired with catman DAQ software can be published in an InfluxDB dashboard.
This Tech Note explains the basics of video recording in catman AP and describes the related workflow.
This Tech Note describes the acquisition and analysis of acoustic signals by QuantumX MX410B and catman AP.
This Tech Note describes how to use HBM's QuantumX or ruggedized SomatXR and software catmanAP for crash testing.
This Tech Note describes how to send CAN signals with catman AP via the embedded script functionality.
This Tech Note will familiarize you with some basics in signal analysis using QuantumX data acquisition module and catman software.
This Tech Note describes how to use QuantumX and catman for strain and strain rate measurements on printed circuit boards.
Within our knowledge bases, you will find an extensive collection of technical articles, tutorials, check lists and 'how to' videos for your measurement tasks.