BOA optimizes exhaust flex-joints to market faster and reduces design risk

BOA GROUP, GERMANY

Introduction

BOA specializes in the engineering and production of flex-joints for exhaust emission systems that decouple the engine motion from the exhaust structure. Exhaust flexjoints need to be custom engineered for each application in order to balance their static offset and dynamic motion, and ensure they meet fatigue life requirements for any automotive, commercial vehicle and off-road application. The data required for this custom design process is captured during road load data acquisition (RLDA) at a proving ground. In the past, several steps were required to analyze the data and it was necessary to manage every single step of this complex process using different software products which slowed the decision-making process. BOA has streamlined its engineering process by implementing nCode GlyphWorks. GlyphWorks automates most of the test data analysis process and eliminates the need to convert file formats, thereby reducing the possibility of having to redo the analysis due to input errors. With some of the data analysis now completed on-site, soon after RLDA, preliminary engineering decisions can be made on the spot and the RLDA can be concluded with confidence that additional data will not need to be collected later.

chevron_left

Challenge
Solution
Result
Client Description

chevron_right

Automate and simplify complex test data analysis.
Handle test data and CAE fatigue analysis within a single environment.
Evaluate design options and change the design if necessary in the early stages of the design process.

Importance of physical testing

BOA creates custom mechanical bellows designs to meet the requirements of specific automotive, on-road and off-road applications for exhaust, on-engine and intercooler systems. The company uses finite element analysis software to simulate the ability of proposed bellows designs to decouple the engine motion from the rest of the system. The company then builds a prototype of the proposed design that the customer installs on a vehicle for testing at the proving grounds, capturing data from accelerometers, strain gauges and displacement sensors.

The primary purpose of physical testing for BOA is to validate the critical tradeoff between static manufacturing/assembly offset and dynamic range. The exhaust flex joint has a certain amount of flexibility, or dynamic range, which is needed to accommodate the relative motion of the engine and the exhaust system. However, the initial variation in alignment between the engine and exhaust system, called the static offset, takes up a certain amount of that dynamic range. Physical testing is needed to determine the dynamic range required by the vehicle’s operating envelope to ensure it is within the flex hose’s dynamic range.

Physical testing is also performed to determine the fatigue life of the flex joint on this particular vehicle. The required life of the flex joint might be 150,000 miles, yet there is rarely time to drive the prototype for this full distance. In any case, the life of the flex joint is determined not by how many miles the vehicle is driven but by the number and magnitude of severe loads it receives, such as when the vehicle goes over a pothole. The amount of damage produced by these events is estimated by driving a prototype with the flex joint installed over potholes, Belgian blocks, or other hazards designed to generate severe loads on the flex joint. The loads from each event are recorded by the sensors.

The damaging events are converted to stresses and strains. The vehicle OEM determines a duty cycle that defines how many of each of these damaging events the vehicle is expected to see during its warranty life. The test data is compressed and accelerated to generate a damage profile that corresponds to the OEM’s duty cycle and is used as input for a fatigue analysis that predicts the life of the flex joint.

Previous test data analysis process

BOA has previously used a number of different internally developed and commercial software packages for test data analysis. Each time engineers moved from one software package to another they had to go through a data conversion process. The test data was typically captured in Microsoft Excel. MATLAB routines were used to convert the test data to stresses and strains. Developing the duty cycle by combining many events from the road test data was a tedious, manual process.

Data was then converted to the proprietary format used by a fatigue analysis software package. The data conversion and manual processes caused analysis delays, so a considerable period of time was required to determine whether or not the RLDA had captured all of the necessary data. By this time everyone involved had usually traveled back from the proving ground to their offices and were often involved in other projects, hence producing further delays.

Switching to new test data analysis tool

BOA selected nCode software to streamline its engineering test data analysis because of its ability to handle the complete process within a single environment and its wide range of specialized tools for both test data and FE fatigue analysis.

BOA also switched from its previous fatigue analysis software to nCode DesignLife which integrates with GlyphWorks to enable test data analysis and CAE fatigue analysis in one environment. BOA is able to accurately predict the failure location by using capabilities in DesignLife such as hot spot detection in 3D, stress distribution in 3D, and virtual strain gauge analysis.

HBK’s Engineering Solutions team built a powerful Asset Performance Framework based on ReliaSoft XFRACAS, and has partnered with SMX to successfully meet US Navy requirements.

BOA now performs its complete analytical process within GlyphWorks. BOA engineers created the analysis workflow by simply dragging and dropping analysis building blocks. This approach eliminates the need to convert data to a different format and makes it possible to partially automate their test data analysis process. The company has developed custom scripts that use its own algorithms to convert RLDA into stress-life and strainlife curves needed for fatigue analysis.

BOA engineers also use GlyphWorks to perform post-processing of raw sensor data to 6 degree of freedom (DOF) relative motion data of an exhaust flex hose using complex mathematical algorithms. The data is automatically converted into reports that were defined by BOA engineers to expedite the design decisionGlyphWorks enables visualization of bellows frequency response using frequency modules making process. The reports make it easy to determine whether or not the original flex hose design has sufficient dynamic range to accommodate the vehicle’s relative motion.

Load-based flex capability analysis using GlyphWorks scripting glyphs

BOA’s GlyphWorks process using scripts and Studio Display for automated reporting of results and plausibility checks for multi-file sensor data inputs

Bellows FE fatigue analysis in nCode DesignLife using duty cycles defined by customer

GlyphWorks enables visualization of bellows frequency response using frequency modules

Optimizing the design

BOA engineers take advantage of GlyphWorks’ capability to utilize test data to perform designed experiments to evaluate fatigue life as a function of design parameters such as the diameter of the flex hose. This approach is performed with DesignLife and can be used to improve the existing design without having to run additional RLDA. BOA engineers have also written scripts that evaluate each potential design combination for manufacturability so only designs that can actually be built are evaluated.

Engineers have developed a custom process within GlyphWorks to generate accelerated drive files for a 6 DOF simulation used to test the part without having to install it in a prototype vehicle and run it on the proving ground. This approach can be used after RLDA is performed on a vehicle to evaluate other flex hose designs without having to re-run the RLDA.

High frequency data acquisition is also performed using a microphone inside the passenger cabin to evaluate the impact of the flex joint on noise/vibration/harshness (NVH). BOA uses GlyphWorks to process the data and perform order analysis, which involves matching the accelerometer data to the speed of the motor and makes the data much easier to interpret.

About BOA

American BOA, incorporated in 1956, is member of the Stutensee, Germany based globally operating BOA Group. Organized in 3 business divisions: Automotive, Industrial and Aerospace, BOA offers a broad range of flexible metal solutions for pipeline systems conveying gases or fluids under severe pressure and temperature conditions. With more than 100 years of experience and 20 subsidiaries or major shareholdings across the world, BOA has become one of the technology leading groups in this particular industry. BOA automotive engineering centers in Germany and in the United States develop specific customized flexible joints and expansion joints for exhaust system, EGR and Oil return lines for engines and mini-bellows for high pressure fuel injection systems which compensate for movements, thermal expansion and decouple vibrations in a reliable way.

BOA Group is a leading system developer and supplier of flexible element technology, bellows, hoses and decoupling devices worldwide. Its customers include almost all European and North American, and many Asian manufacturers of passenger cars and commercial vehicles. BOA pioneered the multi-ply bellows design which absorbs thermal expansion and vibration in engine and compressor piping systems. The multi-ply bellows is manufactured from a laminated tube that consists of thin gaugestainless steel plies. This tubular body is formed into corrugations by a hydroforming process that delivers close tolerances. The use of thin gauge material combined with a large number of corrugations per unit length reduces deflection forces acting on and increases the flexibility of the bellows

About BOA GROUP

Technology Used

nCode - Durability and Fatigue Analysis

Unlock the power of nCode software for all your data processing and durability analysis needs. From digital signal processing to FE-based fatigue analysis, nCode helps you uncover critical insights and manage your data efficiently.

Read More

No more result to load

Related Case Studies

No more result to load

Modern Slavery Statement Imprint Cookie Policy Privacy Policy Sitemap Ethical Business