Genesis Highspeed USB to CAN FD convertor.
The CAN FD semi real-time data output option enables the mainframe to
output periodically calculated RT-FDB results to CAN FD or CAN 2.0 bus.
User selectable update rates as well as selectable calculation results
to be transferred enable application specific setups. After
configuration the mainframe can send results to CAN bus stand-alone
without the use of Perception.
The CAN FD option connects to the GEN DAQ mainframe's USB port and must
be inserted before powering on the mainframe (No plug-and-play support).
At least one acquisition card inside the mainframe needs to have a 1-
GEN-OP-RT-FDB option installed to enable the use of the CAN FD output.
The CAN FD output is only supported on GEN2tB and updated GEN7tA
mainframes