1-MX1615-PAKEASY

QuantumX package: MX1615B+ catmanEASY

Product Package, including:
QuantumX 16 channel Strain Gage Bridge Amplifier MX1615;
Supports the following transducer technologies on all channels:
- Strain gauge in ¼, ½, and full bridge circuit,
variable bridge excitation voltage (DC or 1200Hz
Carrier Frequency), internal quarter bridge
completion (120 or 350 ohm);
- voltage (+/- 10 V);
- PT100, Resistance;
- potentiometer;
- data rate: up to max. 20 kS/s;
- automatic transducer identification: TEDS;

General:
- 1 x Ethernet (PTP), 2 x Firewire;
- Voltage supply: 10...30 V DC, max. 12 W;
- Factory calibration data in accordance with
DIN/ISO 10012 saved on the device (generate
certificate using MX Assistent)

Product bundle is 10% discounted and also includes:
- power supply (1-NTX001);
- package of 16 push-in terminals (1-CON-S1015);
- Ethernet cross-over cable (1-KAB239-2);
- catman®Easy software from HBM, including software
maintenance for the first 12 months.

expand_more

chevron_left

Overview
Downloads
Specifications
Accessories

chevron_right

Strain gauge amplifier – QuantumX MX1615B

The strain gauge amplifier, QuantumX MX1615B, is suitable for precise and safe data acquisition of strain gauges in full-bridge, half-bridge and quarter-bridge configuration, as well as for strain gauge based transducers, potentiometers, resistance thermometers (PT100) or normalized voltage (+/- 10V). This means that this data acquisition unit is an ideal choice whenever strains, forces and displacements are acquired and also temperature influences play a role, too.

The MX1615B module is equipped with 16 sensor inputs, arranged in a very compact housing. As a result, the MX1615B offers an unrivaled channel density in a small space. Typical application areas include static stress tests for FEM models, quasi-dynamic fatigue tests for life analysis, monitoring tasks, material investigations, residual stress analysis, maintenance tasks (e.g. for mechanical testing of PCB circuit boards), as well as for general recording of the load data in the field.

Like all QuantumX data acquisition modules, the MX1615B module offers instant sensor detection via TEDS ("Plug & Measure"), and can be combined and scaled freely with all other QuantumX modules.

catman®Easy

catmanEasy is the basic version of the catman Data Acquisition Software which includes online and offline setup, online visualizations, and online maths as well as recording functionalities. catman Easy can be combined with two different add-on modules:

EasyMath: Mathematics module and auto sequences for catman Easy.
EasyScript: Free programming under VBA in measurement and analysis mode.

Precise

Patented circuitry (4-, 5-, 6-conductor technology, carrier frequency technology, as well as cyclic auto-adjustment on all channels)
Robust mechanism, which prevents electromagnetic and thermal interferences in the measurement result (e.g. due to inverter, high currents, electrical machines or temperature influences)
Individually configurable measuring rates up to 20 kS/s per channel and with high signal bandwidth.
Working standard calibration certificate according to ISO 10012 stored in the module
DAkkS certificate (ISO 17025) from HBM on request

Accurate, interference-free measurement results - for dynamic as well as static measurements. Thanks to the carrier-frequency method, you can count on clear results even when very high interferences occur and long cables are used.

Time-saving and efficient

Plug & Measure - the automatic channel configuration for each sensor
Instant calibration of sensors or plausibility check by internal shunt connection
Fast instrumentation using push-in plugs
Distributed concept and short, prefabricated sensor cables

Realize time and efficiency gains in measurement and analysis: through intelligently combined measurement chains and plug & measure technology. Mechanical voltages can be immediately visualized, stored or digitally forwarded.

Easy to integrate

Suitable for a wide range of ambient temperatures (-20 ° C ... + 65 ° C) with a robust design
Instant results with the help of the HBM catman software for data recording and data analysis
Real-time integration on the Ethernet fieldbus (CX27C), CAN (MX471C), or voltage output (MX878B)
Open software concept (Visual Studio .NET, LabVIEW, etc.)

A strain gauge amplifier that fits into your system landscape. That's how easy it is!

File	Description	Type	Languages	Size
QuantumX MX1615B - Data Sheet (B03899)	QuantumX MX1615B - Data Sheet	Technical Document	English	504 KB
catman - Operating Manual (A05566)	catman - Operating Manual	Technical Document	English	5 MB
catman - Data Sheet (B04486)	catman - Data Sheet	Technical Document	English	368 KB
QuantumX - EU Declaration of Conformity (ce263)	QuantumX - EU Declaration of Conformity	Certificate	English	1 MB
QuantumX - Brochure (S02333)	QuantumX - Brochure	Marketing Document	English	16 MB
MX1615B - CAD	MX1615B - CAD	CAD File	English, Italian, French, Portuguese, Chinese, Korean, German, Spanish, Japanese	17 MB

Key attributes: DAQ Systems
Number of inputs	16
Input	Strain gauge full/half bridge, Strain gauge quarter bridge, Standardized voltage (+/- 10V), Resistance (PTC, NTC, KTY), RTD (Pt, Ni)
Output	None
Interface	TCP/IP, Firewire
Accuracy class	0.05, 0.1
Degree of protection	IP20
Sample rate [S/s]	20000 Hz
Housing	Standalone
Real-time capabilities	None

Main Menu

Main Menu

Main Menu

Main Menu

QuantumX package: MX1615B+ catmanEASY

Strain gauge amplifier – QuantumX MX1615B

catman®Easy

Precise

Time-saving and efficient

Easy to integrate

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com