Package including:
QuantumX family 4-channel measurement module for
precise measurements when connecting SG full
bridge-based transducers;
Supports the following transducer technologies:
- SG full bridge circuit;
For each measurement channel:
- Accuracy: 100 ppm;
- Selectable bridge excitation: 2.5 or 5 V with DC or carrier frequency-based bridge excitation or DC 10 V;
- Measuring ranges: 2.5 or 5 mV/V;
- Transducer impedance: up to max. 5000 ohms;
- Bridge excitation: 600 Hz carrier frequency for interference suppression (max. bandwidth 200 Hz);
- Alternative bridge excitation: Direct voltage (DC)
and therefore high dynamics (6 kHz bandwidth);
- Supports 6-wire circuit;
- Data rate: up to 40 kS/s;
- Galvanically isolated inputs for current feed and
communication;
- TEDS support;
- Scaling: 2-point / gain+offset, table, polynomial,
multi-polynomial;
- Adjustable digital low-pass filter: Bessel, Butterworth, linear phase;
- Working standard calibration certificate saved in the device;
Special functions:
- Real-time calculation of 4x4 matrix for use with
multi-component transducers, etc.;
- Analog output per channel (BNC): +/- 10 V, scalable,
filter;
General information:
- Socket: SubHD15;
- 1 x Ethernet (PTP), 2 x Firewire;
- Voltage supply: DC 10...30 V, max. 8 W;
- Adapter for SubD (KAB416) or MS plug (KAB144) available.
- Factory calibration data in accordance with DIN/ISO 10012 saved on the device (generate certificate using MX Assistent)
Product bundle is 10% discounted and also includes:
- Power supply (1-NTX001);
- 4 transducer plugs with TEDS (1-SUBHD15-MALE)
- Ethernet cross-over cable (1-KAB239-2);
- HBM catmanEasy software + software maintenance
(12 months).
