1-MX840-PAKEASY

QuantumX package: MX840B + catmanEASY

Package including:
8-channel universal amplifier of the QuantumX family;
8-channel universal amplifier of the QuantumX family;
Supports the following transducer technologies
(total of 8 channels):
- 8 x SG half or full bridge (DC or CF with 4.8 kHz);
- 8 x voltage (100 mV, 10 and 60 V);
- 8 x current fed piezos (IEPE / ICP);
- 8 x piezoresistive full bridge;
- 8 x thermocouples (type K, N, R, S, T, B, E, J, C);
- 8 x resistance thermometer (PT100, PT1000);
- 8 x resistance (5000 Ohm);
- 8 x potentiometric transducer;
- 8 x inductive half or full bridge, LVDT;
- 8 x current (±20 mA);
- 4 x rotary encoder (with/without index), counter,
frequency / rpm, SSI protocol;
- 1 x CAN bus (128 signals receiving, 7 DAQ channels
transmitting);
The following applies for each channel:
- Data rate: max. 40 kS/s (7 kHz bandwidth);
- Adjustable low pass filter (Bessel, Butterworth);
- TEDS support: Automatic sensor identification;
- Sensor supply: 5...24 V, 0.7 W (Module: 2 W);
- All inputs electrically isolated;
- Socket: DSubHD 15 pole;
General:
- 1 x Ethernet (PTP), 2 x Firewire;
- Voltage supply: 10...30 V DC, max. 13 W;
- Factory calibration data in accordance with
DIN/ISO 10012 saved on the device (generate
certificate using MX Assistent)
Product bundle is 10% discounted and also includes:
- power supply (1-NTX001)
- 8 transducer plugs with TEDS (1-SUBHD15-MALE)
- Ethernet cross-over cable (1-KAB239-2)
- catman®Easy software from HBM, including software
maintenance for the first 12 months
Optional Accessories:
- connection of thermocouples: 1-THERMO-MXBOARD;
- connection of strain gage 1/4-bridge: 1-SCM-SG120/350;
- connection of IEPE or 10 V over BNC: 1-SUBHD15-BNC;
- connection of 300 V CAT II: 1-SCM-HV.

expand_more

chevron_left

Overview
Downloads
Specifications
Accessories

chevron_right

QuantumX MX840B: 24-Bit Universal Measuring Amplifier for All Common Sensor Technologies

The MX840B modules are the universal measuring amplifiers of the QuantumX series. This means that sensors and transducers based on 17 different sensor technologies can be connected to each of the 8 channels available on these amplifiers (see complete survey below). Owing to the innovative “Plug & Measure” technology, the QuantumX module automatically identifies your transducer and is immediately ready to start measuring.

The universal measuring amplifiers of the QuantumX family thus substantially minimize the setup time in the test stand and are the ideal choice for frequently changing measuring tasks. As always with the QuantumX, the universal measuring amplifiers can be employed as stand-alone instruments or combined with other modules; this can be achieved in various topologies (centralized, distributed, hybrid) as well as by connecting them to a PC (e.g. with HBM catman software) or a data recorder (e.g. for mobile measurements). The resulting flexibility and scalability are definitely unique in the market.

The universal modules provide a 24-bit analog-to-digital converter, sample rates of 40 kS/s per channel, and active low-pass filters and are renowned for their high precision.

The combination of precision, flexibility, and measurement setup at lightning speed makes each QuantumX universal measuring amplifier an “all-purpose tool” for demanding and highly efficient data acquisition in measurement, which has already been used in tens of thousands of applications. Typical applications include test stands, service tasks, mobile data acquisition, and monitoring.

Accuracy class: up to 0.05%
Sample rate per channel: up to 40 kS/s

catman®Easy

catmanEasy is the basic version of the catman Data Acquisition Software which includes online and offline setup, online visualizations, and online maths as well as recording functionalities. catman Easy can be combined with two different add-on modules:

EasyMath: Mathematics module and auto sequences for catman Easy.
EasyScript: Free programming under VBA in measurement and analysis mode.

Time-saving and efficient

Connection of 17 different transducer technologies per channel
Plug & Measure: Automatic sensor identification and channel configuration
Fast calibration of transducers or validation through internal shunt connection
Custom configuration of individual channels
Wide ambient temperature range (-20 °C to +65 °C) and robust design allow use in any location
Distributed system and short, pre-wired sense leads

Minimized setup time in the test stand and an ideal fit for frequently changing measurement tasks, due to immediate sensor identification and universal connectors.

Precise and reliable

24-bit analog-to-digital converter per channel
Individual sample rates of up to 40 kS/s
Active low-pass filter
Accuracy classes ranging from 0.05 to 0.1 (depending on the sensor technology)
Working standard calibration certificate according to ISO 10012 stored in the module
DAkkS certificate (ISO 17025) from HBM on request

Reliable results and proven high quality from HBM ensure successful tests at any time!

Compact, mobile, and scalable

The modules can be used as stand-alone instruments or combined with other measuring modules
Many measuring modules for special tasks are available (e.g. high-precision, torque, full bridges, etc.)
Different topologies (centralized, distributed, hybrid)
Real-time integration with the Ethernet fieldbus (CX27B), CAN (MX471B), or voltage output (MX878B)
Open software concept (Visual Studio .NET, LabVIEW, etc.)

From one to thousands of channels: Measuring equipment that is scalable to fit your requirements and integrates with your system.

File	Description	Type	Languages	Size
QuantumX MX840B - Data Sheet (B03816)	QuantumX MX840B - Data Sheet	Technical Document	English	727 KB
catman - Operating Manual (A05566)	catman - Operating Manual	Technical Document	English	5 MB
catman - Data Sheet (B04486)	catman - Data Sheet	Technical Document	English	368 KB
QuantumX - EU Declaration of Conformity (ce263)	QuantumX - EU Declaration of Conformity	Certificate	English	1 MB
QuantumX - Brochure (S02333)	QuantumX - Brochure	Marketing Document	English	16 MB
MX840B - CAD	MX840B - CAD	CAD File	English, Italian, French, Portuguese, Chinese, Korean, German, Spanish, Japanese	6 MB

Key attributes: DAQ Systems
Number of inputs	8
Input	Strain gauge full/half bridge, Electrical voltage, Standardized current (4-20mA), Inductive bridge, LVDT, SSI, IEPE / CCLD, Piezo resistive bridge, Thermocouples, RTD (Pt, Ni), Resistance (PTC, NTC, KTY), Digital encoder, Timer digital input, CAN
Output	CAN bus
Interface	TCP/IP, Firewire
Accuracy class	0.01, 0.05, 0.1
Degree of protection	IP20
Sample rate [S/s]	40000 Hz
Housing	Standalone
Real-time capabilities	None

Main Menu

Main Menu

Main Menu

Main Menu

QuantumX package: MX840B + catmanEASY

QuantumX MX840B: 24-Bit Universal Measuring Amplifier for All Common Sensor Technologies

catman®Easy

Time-saving and efficient

Precise and reliable

Compact, mobile, and scalable

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com