1-MX430B

QuantumX SG Bridge Amplifier (4)

QuantumX family 4-channel measurement module for
precise measurements when connecting SG full
bridge-based transducers;
Supports the following transducer technologies:
- Strain gage full bridge circuit;
The following applies for each channel:
- Accuracy: 100 ppm;
- Bridge excitation: 2.5 or 5 V with DC
or CF-based bridge excitation or DC 10 V;
- Measuring ranges: 2.5 or 5 mV/V;
- Transducer impedance: max. 5000 Ohm;
- Bridge excitation: 600 Hz CF for interference
suppression (bandwidth: max. 200 Hz);
- Alternative bridge excitation: Direct voltage (DC)
and therefore high dynamics (bandwidth: 6 kHz);
- Supports 6-wire circuit;
- Data rate: max. 40 kS/s;
- Galvanically isolated inputs for current feed and
communication;
- TEDS support: automatic sensor identification;
- Scaling: 2-point / gain+offset, table, polynomial,
multi-polynomial;
- Digital low-pass filter: Bessel, Butterworth,
linear phase;
- Working standard calibration certificate saved in
the device;
Special functions:
- Real-time calculation of 4x4 matrix for use with
multi-component transducers, etc.;
- Analog output per channel (BNC): 10 V, scalable,
filter;
General information:
- Socket: SubHD-15;
- 1 x Ethernet with PTP support;
- 2 x FireWire;
- Voltage supply: DC 10...30 V, max. 8 W;
- Factory calibration data in accordance with
DIN/ISO 10012 saved on the device (generate
certificate using MX Assistent)
- Adapter for SubD (KAB416) or MS plug (KAB144)
available.

expand_more

chevron_left

Overview
Downloads
Specifications
Accessories

chevron_right

QuantumX MX430B: Precision and Maximum Interference Suppression

MX430B is the precise and compact module of the QuantumX family. It provides four inputs for accurate measurement of strain gauge full bridge based sensors such as uni- or multiaxial force sensors, torque transducers as well as pressure sensors. HBM provides the entire measurement chain for efficient measurement: precise sensors, the QuantumX MX430B measurement module and suitable software.

Precise force and torque measurement is essential, in particular when the objective is to determine the exact balance in aerodynamic tests of vehicles, aircraft or sports equipment in the wind tunnel. MX430B is also well suited for other test bench applications demanding high precision and reliability such as the determination of the center of gravity of rockets, measurement analysis of fuselage or load analysis in engine test benches. The module is lightweight and compact and thus allows for portable use for servicing in machine and sensor calibration.

Precision

4 strain gauge full bridge inputs offer a minimum accuracy of 100 ppm
Precision with repetitive and long-term measurements
Withstands interferences such as electromagnetic radiation or temperature thanks to carrier frequency analysis
Working standard calibration certificate according to ISO 10012 stored in the module
DAkkS certificate (ISO 17025) from HBM on request

Particularly well suited for test bench applicationsdemanding high precision and reliability such as aerodynamic analyses in the wind tunnel

Flexibility

Precise validation of quantities such as force, torque and pressure
For static and dynamic measurements
Distributable, therefore requiring minimal wiring effort
Flexible parameterization, through use of every channel in either AC or DC mode

Enhanced long-term stability through patented background calibration

Easy Integration

Allows for portable use for servicing in machine and sensor calibration
TEDS support enables sensors to be quickly and reliably replaced
Real-time integration thanks to directly scalable voltage outputs (+/- 10 V) with optional filter, EtherCAT (CX27B), CAN (MX471B)
Reliable catman software support

Efficient and dynamic system analysis with full bandwidth

File	Description	Type	Languages	Size
QuantumX MX430B - Data Sheet (B04130)	QuantumX MX430B - Data Sheet	Technical Document	English	390 KB
QuantumX - EU Declaration of Conformity (ce263)	QuantumX - EU Declaration of Conformity	Certificate	English	1 MB
QuantumX - Brochure (S02333)	QuantumX - Brochure	Marketing Document	English	16 MB
MX430B - CAD	MX430B - CAD	CAD File	English, Italian, French, Portuguese, Chinese, Korean, German, Spanish, Japanese	5 MB

Key attributes: DAQ Systems
Number of inputs	4
Input	Strain gauge full/half bridge
Output	Voltage (+/- 10V)
Interface	TCP/IP, Firewire
Accuracy class	0.01
Degree of protection	IP20
Sample rate [S/s]	40000 Hz
Housing	Standalone
Real-time capabilities	None

Product Code	Description
1-BPX001	QuantumX backplane wall mounting
1-SUBHD15-SAVE	Port saver (SubHD15)
1-BPX003	QuantumX backplane (5)
1-SCM-SG350	¼ bridge completion (SubHD15)
1-CASECLIP	QuantumX mounting set
1-SCM-SG120	¼ bridge completion (SubHD15)
1-BPX002	QuantumX backplane rack mounting
1-CASEFIT	QuantumX mounting plate
1-TEDS-PAK	TEDS pack, 5x 1-wire EEPROM, DS24B33+
1-NTX001	Adapter power supply, 24 V/DC