ClipX Single-channel DC and carrier frequency Signal conditioner for strain gage full and half bridges as well as piezoresistive and potentiometric transducers, PT100 and +/- 10V and +/-20mA, 4-20mA standard signals (switchable)
TEDS channel parametrization via 0 and 1-wire connection IEEE1451.4
Accuracy class 0.01 for strain gauge full bridges, otherwise 0.1
Sampling rate 19.2 kHz, Digital filter 0.02 - 3000 Hz (-3dB)
3 peak value memories, 4 limit value switches,
2 digital inputs, 2 digital outputs (configurable)
1 analog output +/- 10V or 4-20mA (switchable)
6 internal calculation channels for real-time mathematics, Controller functions, logic modules, etc.
Up to 6 ClipX modules can be connected for data transfer and calculations via the ClipX bus
Ethernet interface for PC applications under Windows, LabView, Linux, Delphi for full parameterization and data transmission up to 1 kHz, OPC-UA server via TCP/IP
Internal measurement memory up to 4000 values from 6 different signal sources
10 parameter memories (recipes)
Module for DIN rail mounting according to DIN EN 50022, degree of protection IP20
Supply voltage 10 - 30 V DC ,Power consumption max. 5 W
Convenient operation via integrated web server
Calibration certificate available as PDF in the device memory
Plug set (push-in) included
(ePLAN and 3D STEP files are available as free downloaded from www.hbm.com/clipx)