ClipX Single-channel DC and carrier frequency Signal conditioner for strain gage full and half bridges as well as piezoresistive and potentiometric transducers, PT100 and +/- 10V and +/-20mA, 4-20mA standard signals (switchable)
TEDS channel parametrization via 0 and 1-wire connection IEEE1451.4
Accuracy class 0.01 for strain gauge full bridges, otherwise 0.1
Sampling rate 19.2 kHz, Digital filter 0.02 - 3000 Hz (-3dB)
3 peak value memories, 4 limit value switches,
2 digital inputs, 2 digital outputs (configurable)
1 analog output +/- 10V or 4-20mA (switchable)
6 internal calculation channels for real-time mathematics,
Controller functions, logic modules, etc.
Up to 6 ClipX modules can be connected for data transfer and
calculations via the ClipX bus
10 parameter memories (recipes)
Communication interface according to PROFINET (RT / IRT), ETHERCAT,
Ethernet/IP, Modbus-TCP switchable with object directory, transmission
speed max. 4kHz, with Ethernet/IP and Modbus-TCP max.1 kHz
Ethernet interface for PC applications under Windows, LabView, Linux,
Delphi for full parameterization and data transmission up to 1 kHz, OPC-
UA server via TCP/IP
Internal measurement memory up to 4000 values from 6 different signal
sources
Module for DIN rail mounting, according to DIN EN 50022, degree of
protection IP20
Supply voltage 10 - 30 V DC, Power consumption max. 5 W
Convenient operation via integrated web server
Calibration certificate available as PDF in the device memory
Plug set (push-in) included
(ePLAN and 3D STEP files are available as free downloaded from
www.hbm.com/clipx)