3 channel eGrid POWER ANALYZER GEN2tB:
The POWER ANALYZER is a PC connected front end for
power grid related testing. The PC then can display
power results in real time, store results and raw
data and analyze stored data in post process.
It offers 3 power channels (3 voltage <(>&<)> 3 current)
and 2 frequency inputs for torque or speed sensors.
It consists of:
1 x GEN2tB mainframe with 2 slots (1 open)
1 x GN311B input cards with 3 power channels each
1 x Perception Enterprise software with eGrid
option
*** mainframe ***
1 x GEN2tB tethered mainframe:
- 2 acquisitions slots
- portable use or rack mountable
- 1 GBit Ethernet, PTPv2.0, 100 MB/s
- up to 32 digital events and 4 T/C channels
- Master/Sync port (needs SFP)
- optical 1 GBit Ethernet port (needs SFP)
- status display for system info
*** input cards ***
1 x GN311B power analyzer card
- 3 power channels (voltage <(>&<)> current)
- 200 kS/s, 18 bit, 2 GB RAM
- voltage inputs ranges (5): ±50V to ±1500V DC,
1000V CAT IV, 1200V DC CAT IV, 1500V DC CAT III
- current inputs ranges (7): ±75mA to ±2A or
current clamp usage: ±5mV to ±20V
- 16 digital events and 2 T/C channels
*** software included ***
- Perception Enterprise software with eGrid option
- for setting up the system including user defined
formulas, real time display of power results
(numerical / trends / Polar) and raw data
(scope/FFT) and post processing of stored data.
*** options (factory installed, to be ordered
seperatly) ***
- more power channels (6 max)
- more torque / speed inputs
- SFP modules for:
* optical Master/Sync
* optical 1 GBit Ethernet SFP module
- internal SSD: 500 GB, 200 MB/s
- CAN FD/CAN 2.0 in/out/acquisition control