6 channel eGrid POWER ANALYZER GEN7tA:
The POWER ANALYZER is a PC connected front end for
power grid related testing. The PC then can display
power results in real time, store results and raw
data and analyze stored data in post process.
It offers 6 power channels (6 voltage <(>&<)> 6 current)
and 4 frequency inputs for torque or speed sensors.
It consists of:
1 x GEN7tA mainframe with 7 slots (5 open)
2 x GN311B input cards with 3 power channels each
1 x Perception Enterprise software with eGrid
option
*** mainframe ***
1 x GEN7tA tethered mainframe:
- 7 acquisitions slots
- bench top or rack mountable
- 1 GBit Ethernet, PTPv2.0, 100 MB/s
- up to 96 digital events and 12 T/C channels max
- Master/Sync connector
- optical 1 GBit Ethernet port (needs SFP)
- 30W QuantumX DC power output
*** input cards ***
2 x GN311B power analyzer card
- 3 power channels (voltage <(>&<)> current)
- 200 kS/s, 18 bit, 2 GB RAM
- voltage inputs ranges (5): ±50V to ±1500V DC,
1000V CAT IV, 1200V DC CAT IV, 1500V DC CAT III
- current inputs ranges (7): ±75mA to ±2A or
current clamp usage: ±5mV to ±20V
- 16 digital events and two counter / timer inputs
*** software included ***
- Perception Enterprise software with eGrid option
- for setting up the system including user defined
formulas, real time display of power results
(numerical / trends / Polar) and raw data (scope/
FFT) and post processing of stored data.
*** options (factory installed, to be ordered
seperatly) ***
- more power channels (21 max)
- more torque / speed inputs
- other input boards for temp. or vibration data
(NVH)
- SFP modules for optical 1 GBit Ethernet
- CAN FD/CAN 2.0 in/out/acquisition control
- option carrier card for the following options
* 10 GBit Ethernet (RJ45 or optical), 400 MB/s
* EtherCAT real-time output
* Master output card, optical, 4 port