U10F

The easy to mount and extreme precise U10F is first chloice for high end production, test stands and experimental tasks

NEW: Now available with integrated digital amplfier with IO-Link output

U10F

expand_more

chevron_left

Overview
All models
Downloads
Specifications
Accessories

chevron_right

U10F Tensile-Compressive Force Transducer: Capacities Ranging from 50 kN to 1.25 MN

Like the proven U10M and C10 transducers, the especially low-profile force transducers of the U10F series use the shear force transducer measurement principle to enable them to achieve the same outstanding accuracy and small deflaction as their sister models. This makes the U10F load cells suitable for acquiring fast, dynamic force trends and static forces.

The sensors are hermetically welded and made of stainless steel. Flange connections on both sides allow for installation, which significantly facilitates the process compared to sensors with central threads. For this purpose, HBK offers screw sets with a coated finish for corrosion protection. At the same time, the coating ensures a uniform and low coefficient of friction so that no greasing or oiling of the screws is required.

Various practical configurations enable the U10F, like its sister models, U10M and C10, to be flexibly adapted to the measurement task.

HBM accuracy class: 0.04... 0.05
Capacities: 50 kN to 1.25 MN
Output signal: mV/V (passive Wheatstone bridge) and IO-Link

New: With the new option "VAIO" the U10F comes along with an integrated digital amplifier. Your advantages:

Greater precision: Linearity error 0,005 % for capacities up to 250 kN, higher capacities improved to 0.03 %. TCZero: 0.006 % /10K

Improved reliability: The Sensor health monitoring of the U10F sends warnings in case of exceeding temperature or mechanical limits before problems occur

More information: Temperature measurement, statistical information

Lower costs, easy setup: The C10 comes along as adjusted sensor: No more complicated or time consuming setups. You will get correct readings in Newtons as soon as you have connected the U10F to an IO - Link master. Low cabling costs.

Standard features: Limit switches, peak detection, digital output, Filter

Fast: Internal sampling rate: 40 kHz, 1 ms cycling time to the IO-Link master

Advantages of all U10F

Precise

Benchmark precision
TCzero of only 150 ppm/10 K (just 75 ppm/10K with integrated amplifier)
Low linearity error (0.035 – 0.05% depending on the capacity, just 0.005 % with integrated digital amplifier)
Very low hysteresis (0.04 – 0.05 % depending on the capacity)

Ensure cost-effectiveness by investing today in the accuracy that will be required tomorrow. Precision means a larger measurement range. Perform more measurement tasks using the same sensor.

Robust and durable

Made from stainless steel, IP68 degree of protection (with cable option)
High overload reserves
High fatigue strength even when the measurement range is fully utilized in alternating tension/compression mode
Vibration, shock and EMC tested in compliance with international guidelines
Sensor health monitoring warns you in case of exceeding mechanical or thermal limits (for sensors with integrated amplfier)

The U10F is reliable. Climatic and EMC testing at HBK ensures failsafe operation even under difficult conditions. Even more relaible if you choose the integrated amplifier as an option

Easy-to-install and adaptable

Easy installation using screw connections – you only need a torque wrench
High-strength, corrosion-resistant screws are available as a mounting kit (including detailed information on maximal parasitic forces and moments)
Practical configuration options, for example, double bridge, various plug and cable options, TEDS, etc.
IO LINK output available as an option

Fast and reliable installation using standard tools. Clear specification of the mechanical load capacity in practical use!

Code	Capacity group	Capacity (nominal load) [N]	Capacity (nominal load) [lbf]	HBK Accuracy class	Height (without accessories)	Height (without accessories)	Diameter (without cable or plug)	Diameter (without cable or plug)
1-U10F/50KN	1-50 kN	50 kN	11.2 klbf	0.04	44.5 mm	1.75 in	153.9 mm	6.059043 in
1-U10F/1.25MN	>500 KN	1.25 MN	281 klbf	0.05	127 mm	5 in	390 mm	15.3543 in
1-U10F/500KN	50-500 kN	500 kN	112 klbf	0.05	88.9 mm	3.5 in	279 mm	10.98423 in
1-U10F/250KN	50-500 kN	250 kN	56.2 klbf	0.04	63.5 mm	2.5 in	203.2 mm	7.999984 in
K-U10F	50-500 kN	50 kN,125 kN,250 kN,500 kN,1.25 MN	11.2 klbf,28.1 klbf,56.2 klbf,112 klbf,281 klbf	0.04,0.05	44.5 mm,63.5 mm,88.9 mm,127 mm	1.75 in,2.5 in,3.5 in,5 in	390 mm,153.9 mm,203.2 mm,279 mm,153.9 mm	15.3543 in,6.059043 in,7.999984 in,10.98423 in
1-U10F/125KN	50-500 kN	125 kN	28.1 klbf	0.04	44.5 mm	1.75 in	153.9 mm	6.059043 in

File	Description	Type	Languages	Size
U10F - Data Sheet (B05699)	U10F - Data Sheet	Technical Document	English	342 KB
U10F - Mounting Instructions (A05704)	U10F - Mounting Instructions	Technical Document	English, Italian, French, Chinese, German	1 MB
Reliable force measurement - Brochure (S00859)	Reliable force measurement - Brochure	Marketing Document	English	1 MB

U10F
Capacity group	50-500 kN, 1-50 kN, >500 KN
Capacity (nominal load) [N]	500 kN, 50 kN, 125 kN, 250 kN, 1.25 MN
Capacity (nominal load) [lbf]	112 klbf, 11.2 klbf, 28.1 klbf, 56.2 klbf, 281 klbf
Capacity in N (nominal load)	500000 N, 50000 N, 125000 N, 250000 N, 1250000 N
Direction	Both directions
Strain gauge / piezo	Strain Gauge
Calibration	Calibrated
Output signal	mV/V (passive strain gauge), IO-Link
HBK Accuracy class	0.05, 0.04
Load cell design	Flange mounting
Degree of protection	IP67
Mechanical adaptation	Both side flange mounting
Height (without accessories)	88.9 mm, 44.5 mm, 63.5 mm, 127 mm
Height (without accessories)	3.5 in, 1.75 in, 2.5 in, 5 in
Diameter (without cable or plug)	279 mm, 153.9 mm, 390 mm, 203.2 mm
Diameter (without cable or plug)	10.98423 in, 6.059043 in, 15.3543 in, 7.999984 in

Product Code	Description
1-SRS/M24/2/150	M24 screw set
1-SRS/M24/2/170	M24 screw set

Showing 0 of 0 results

Main Menu

Main Menu

Main Menu

Main Menu

U10F

U10F Tensile-Compressive Force Transducer: Capacities Ranging from 50 kN to 1.25 MN

New: With the new option "VAIO" the U10F comes along with an integrated digital amplifier. Your advantages:

Advantages of all U10F

Precise

Robust and durable

Easy-to-install and adaptable

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com