U10M

Ultra precise force transducer U10M has multiple uses focusing on applications in test benches, material testing machines, and challenging tasks in production.

NEW: Now available with integrated digital amplfier with IO-LINK output. Configure your U10M here

U10M

expand_more

chevron_left

Overview
All models
Downloads
Specifications
Accessories

chevron_right

U10M Force Transducer for tensile and cmpressive forces: Capacities from 1.25 kN to 2.5 MN

The rotationally symmetric, low-profile U10 force is oustanding precise and made from rustfree materials. U10M load cells are suitable for acquiring fast, dynamic force trends and static forces.HBK offers a wide range of options (Double bridges, TEDS, mechanical adaptations, integrated amplifiers,...) so that a U10 can be adapted to its measurment task.

HBM accuracy class: 0.02 to 0.05
Capacities: 1.25 kN to 2.5 MN
Output signals: mV/V (passive Wheatstone Bridge), IO- Link

New: With the new option "VAIO" the C10 comes along with an integrated digital amplifier. Your advantages:

Greater precission: Linearity error 0,005 % for capacities up to 250 kN, higher capacities improved to 0.03 %. TCZero: 0.006 % /10K

Improved reliability: The Sensor health monitoring of the C10 sends warnings in case of exceeding temperature or mechanical limits before problems occur

More information: Temperature measurement, statistical information

Lower costs, easy setup: The U10M comes along as adjusted sensor: No more complicated or time consuming setups. Wen connected to an IO - Link master you weill get correct readings in Newtons immediately.

Many built in features: Limit switches, peak detection, digital output, Filter

Fast: Internal sampling rate: 40 kHz, 1 ms cycling time to the IO-Link master

Advantages of all U10M

Precise

Benchmark precision
TCzero of 150 ppm/10 K or 75 ppm/10 K with 200% calibration. With integrated amplifier: 75 ppm/10K or 60 ppm/10k with 200 % calibration
Minimal linearity deviation and hysteresis and very good repeatability.
With integrated instrument: Linearity deviation at the physical limit

Large measuring range in compliance with specified accuracy requirements, improved yield in product tests through small error bands. Even lower measurment uncertainty with build in amplfiers

Robust

Made from rust-proof materials, degree of protection IP68 (with cable option)
Electrical bending moment compensation: Bending (for example resulting from applied lateral forces) does not impact the measurement result
Fit for fatigue tests, peak to peak load of 200% of nominal force can be applied
Vibration resistant
EMC approved
With IO-LInk: Sensor Health monitoring warns in case of exceeding mechanical or thermal limits.

Reliability even in unfavorable measurement conditions (e.g. temperature gradients, parasitic mechanical influences). IMproved relaibility with built in amplifier

Adaptable to your needs and cost effective

U10 optimally adapts to its measurement task: Over 15,000 combinations are available
Select from many options such as TEDS, flange or foot adapter version, 100% or 200% calibration, load introduction pin, several connectors and cable options and more

Time saving plug-and-play solutions, easy adaption, cost effective amplifier versions.

Code	Capacity group	Maximum capacity (nominal load) [N]	Maximum capacity (nominal load) [lbf]	HBK Accuracy class	Height (without accessories)	Height (without accessories)	Diameter (without cable or plug)	Diameter (without cable or plug)
1-U10M/1.25KN	1-50 kN	1.25 kN	281 lbf	0.02	34.9 mm	1.37 in	104.8 mm	4.125976 in
1-U10M/1.25MN	>500 KN	1.25 MN	281 klbf	0.05	127 mm	5.08 in	390 mm	15.3543 in
1-U10M/2.5KN	1-50 kN	2.5 kN	562 lbf	0.02	34.9 mm	1.37 in	104.8 mm	4.125976 in
1-U10M/5KN	1-50 kN	5 kN	1.12 klbf	0.02	34.9 mm	1.37 in	104.8 mm	4.125976 in
1-U10M/12.5KN	1-50 kN	12.5 kN	2.81 klbf	0.03	34.9 mm	1.37 in	104.8 mm	4.125976 in
1-U10M/25KN	1-50 kN	25 kN	5.62 klbf	0.03	34.9 mm	1.37 in	104.8 mm	4.125976 in
1-U10M/50KN	1-50 kN	50 kN	11.2 klbf	0.04	44.5 mm	1.75 in	153.9 mm	6.059043 in
1-U10M/125KN	50-500 kN	125 kN	28.1 klbf	0.04	44.5 mm	1.75 in	153.9 mm	6.059043 in
1-U10M/250KN	50-500 kN	250 kN	56.2 klbf	0.04	63.5 mm	2.5 in	203.2 mm	7.999984 in
1-U10M/500KN	50-500 kN	500 kN	112 klbf	0.05	88.9 mm	3.5 in	279 mm	10.98423 in
K-U10M	1-50 kN	1.25 kN, 2.5 kN, 5 kN, 12.5 kN, 25 kN, 50 kN, 125 kN, 250 kN, 500 kN, 1.25 MN	281 lbf, 562 lbf, 1.12 klbf, 2.81 klbf, 5.62 klbf, 11.2 klbf, 28.1 klbf	0.02, 0.03, 0.04, 0.05	34.9 mm, 44.5 mm, 63.5 mm, 88.9 mm, 127 mm	1.37 in, 1.75 in, 2.5 in, 3.5 in	104.8 mm, 390 mm, 153.9 mm, 203.2 mm, 279 mm	4.125976 in, 15.3543 in, 6.059043 in, 7.999984 in, 10.98423 in

File	Description	Type	Languages
U10M - Data Sheet (B01444)	U10M - Data Sheet	Technical Document	English
U10M / U10S - Mounting instructions (A01385)	U10M - Mounting Instructions	Technical Document	English, Italian, French, Chinese, German
U10M, U10S, U10F, U15, C10, C15 - EU Declaration of Conformity (ce313)	U10M, U10S, U10F,U15, C10, C15 - EU Declaration of Conformity	Certificate	English
Reliable force measurement - Brochure (S00859)	Reliable force measurement - Brochure	Marketing Document	English

U10M
Capacity group	1-50 kN, 50-500 kN, >500 KN
Maximum capacity (nominal load) [N]	12.5 kN, 5 kN, 1.25 kN, 2.5 kN, 25 kN, 50 kN, 125 kN, 250 kN, 500 kN, 1.25 MN
Maximum capacity (nominal load) [lbf]	2.81 klbf, 1.12 klbf, 281 lbf, 562 lbf, 5.62 klbf, 11.2 klbf, 28.1 klbf, 56.2 klbf, 281 klbf, 112 klbf
Direction	Both directions
Strain gauge / piezo	Strain Gauge
Calibration	Calibrated
Output signal	mV/V (passive strain gauge), IO-Link
HBK Accuracy class	0.03, 0.02, 0.04, 0.05
Degree of protection	IP67
Mechanical adaptation	Central thread
Height (without accessories)	34.9 mm, 44.5 mm, 63.5 mm, 88.9 mm, 127 mm
Height (without accessories)	1.37 in, 1.75 in, 2.5 in, 3.5 in, 5.08 in
Diameter (without cable or plug)	104.8 mm, 390 mm, 153.9 mm, 203.2 mm, 279 mm
Diameter (without cable or plug)	4.125976 in, 15.3543 in, 6.059043 in, 7.999984 in, 10.98423 in

List of accessories available for all variants of this family

Product Code	Description
1-KAB158-3	Connection cable, thread - free ends
1-KAB157-3	Connection cable, bayonet - free ends
1-Z4/20KN/ZGUW	Knuckle eye for Z4A, U10, U15
1-ZGAM72F	Knuckle eye M72 extern.thread f.U10M/U15
3-3312.0382	Bayonet connector U10/C10/U15/C6b
1-Z4/20KN/ZGOW	Knuckle eye top for Z4A, U15
3-3312.0354	Thread connector for U10/C10/U15/C15/C6b
1-ZGAM42F	Knuckle eye M42 extern.thread f.U10M/U15
1-ZGAM33F	Knuckle eye M33 extern.thread f.U10M/U15
1-ZGIM72F	Knuckle eye M72 intern.thread f.U10M/U15
1-ZGIM42F	Knuckle eye M42 intern.thread f.U10M/U15
1-ZGIM33F	Knuckle eye M33 intern.thread f.U10M/U15
K-CAB-F	Cable, configurable f. force transducers
1-EEK4	Ground cable, copper, length 400mm