Production Testing Sensors

Whether you need a press-on sensor designed to measure structure-borne noise in tight or difficult-to-reach spaces in a test-stand environment or you want to measure geometry errors in rotating structures for end-of-line gear and transmission testing, we have the products.

BKS03

BKS03 is a press-on sensor designed to provide high-quality measurements without using adhesive or mounting fixtures. The sensor consists of an accelerometer mounted on a silicon ball and mounting post. In the test stand, the mounting post is connected to an actuator, which presses the accelerometer against the unit under test.

Leggi tutto
BKS10

BKS10 is a small press-on sensor designed to provide high-quality measurements in tight spaces without using adhesive or mounting fixtures. The sensor consists of an accelerometer mounted on a silicon column and mounting post. To minimize needed space and protect the accelerometer cable, the cable is routed through the silicon column and mounting post.

Leggi tutto
MVS18

The magnetic accelerometer MVS18 was developed for use on movable test objects. It can be used wherever automatic infeed of a BKS03/10 sensor is not possible. It can also be used for testing prototypes and small series. To do this the MVS18 is manually placed on a suitable magnetic surface of the test specimen. In the case of pure aluminium assemblies, the housing screws can be used for mounting.

Leggi tutto
TAC15

L'accelerometro torsionale TAC15 verifica i componenti rotanti mentre sono sottoposti a carichi e condizioni operative. Ciò consente la valutazione degli errori geometrici legati al rumore. TAC15 misura la variazione di velocità sotto forma di accelerazione torsionale.

Leggi tutto

No more result to load

Production Testing Sensors

No more result to load