Public Online Courses

HBK ACADEMY

Successful test and measurement results with HBK Academy

Data is key to further develop your products.

The HBK Academy seminars offer trainings from skilled technicians and our trainers guide you on the way to the right result. From the selection and installation of the sensor system, the safe measurement data acquisition, to the evaluation of your results.

Check out our available public online courses.

Test & Measurement courses (HBM)

8-10 February, 2021 - Working with catman / Basic Seminar

Our online seminar provides you with a fast and efficient introduction to the catman data acquisition software. At the beginning of the seminar you will dial into one of our training computers. After the explanations from the trainer you can then experience the individual fuctions of the software step by step from your PC with our equipment.

Duration: 3 days at 3-hour online sessions per day

22-25 February, 2021 - Electric motor fundamentals, understanding your drive

In this seminar you will get a broad overview over the fundamental principles of different electrical machines and inverters. We will show you detailed measurements, that will help you understanding your drive line. Finally, after analyzing the measurements in the seminar, you will be able to even optimize your system.

Duration: 4 days at 3½-hour online sessions per day

23-25 February, 2021 - Experimental Stress Analysis for Component Assessment

This seminar provides the theoretical and practical knowledge required for a confident experimental stress analysis, which can be used for verification of FEM models.

Duration: 3 days at 3½-hour online sessions per day

2-5 March, 2021 - Measuring Without Electromagnetic Interference

Designed specifically for measurement engineers: A specialized training on how to avoid and shield against electromagnetic interference impacting the measurement result.

Duration: 4 days at 3½-hour online sessions per day

8-11 March, 2021 - Determining Measurement Uncertainty

Only with a seriously determined measurement uncertainty does your readout become a meaningful measurement result.

Duration: 4 consecutive days / 3,5 hours parts

16-18 March, 2021 - Measuring Force Correctly

Force is a vectorial quantity that is measured in many places and in different ways. The challenge is to select the optimum force transducer for the respective application and to install it correctly. This seminar provides you with the necessary skills for the professional installation of force measurement chains in a wide range of applications.

Duration: 3 days at 3½-hour online sessions per day

16-18 March, 2021 - Working with catman / Advanced-Seminar

Finally, unleash the full functionality of catman! If you want to automate your measurements, design and optimize them, generate complex analyses with them and become familiar with the complete catman range, this seminar is for you!

Duration: 3 days at 3-hour online sessions per day

26-28 April, 2021 - Measuring Torque Correctly

Torque is the most demanding of all mechanical measured variables, since it is composed of two basic mechanical variables. In addition, the torque sensor usually measures under rotation, which places high demands on the assembly. The user therefore requires a high degree of knowledge and experience in theory and practice, which you can acquire in this seminar.

Duration: 3 days at 3-hour online sessions per day

4-5 May, 2021 - Perception V8 ePowerSuite - Solution for Optimized Testing of Electric Drives

Take advantage of the full functionality of the HBM ePowerSuite testing system within the new Perception version 8 for power analysis and measurement, data acquisition and analysis on electric drives and inverters. This seminar puts you in a position to use the system quickly and safely in all its applications.

Duration: 2 consecutive days / 3,5 hours parts

18-20 May , 2020 - Working with catman / Basic Seminar

Our online seminar provides you with a fast and efficient introduction to the catman data acquisition software. At the beginning of the seminar you will dial into one of our training computers. After the explanations from the trainer you can then experience the individual fuctions of the software step by step from your PC with our equipment.

Duration: 3 days at 3-hour online sessions per day

7-10 June, 2021 - Electric motor fundamentals, understanding your drive

In this seminar you will get a broad overview over the fundamental principles of different electrical machines and inverters. We will show you detailed measurements, that will help you understanding your drive line. Finally, after analyzing the measurements in the seminar, you will be able to even optimize your system.

Duration: 4 days at 3½-hour online sessions per day

6-8 July, 2021 - Working with catman / Basic Seminar

Our online seminar provides you with a fast and efficient introduction to the catman data acquisition software. At the beginning of the seminar you will dial into one of our training computers. After the explanations from the trainer you can then experience the individual fuctions of the software step by step from your PC with our equipment.

Duration: 3 days at 3-hour online sessions per day

14-17 September, 2021 - Determining Measurement Uncertainty

Only with a seriously determined measurement uncertainty does your readout become a meaningful measurement result.

Duration: 4 consecutive days / 3,5 hours parts

15-17 September, 2021 - Measuring Torque Correctly

Torque is the most demanding of all mechanical measured variables, since it is composed of two basic mechanical variables. In addition, the torque sensor usually measures under rotation, which places high demands on the assembly. The user therefore requires a high degree of knowledge and experience in theory and practice, which you can acquire in this seminar.

Duration: 3 days at 3-hour online sessions per day

28 Sept. - 1 Oct., 2021 - Measuring Without Electromagnetic Interference

Designed specifically for measurement engineers: A specialized training on how to avoid and shield against electromagnetic interference impacting the measurement result.

Duration: 4 days at 3½-hour online sessions per day

4-7 October, 2021 - Measuring Without Electromagnetic Interference

Designed specifically for measurement engineers: A specialized training on how to avoid and shield against electromagnetic interference impacting the measurement result.

Duration: 4 days at 3½-hour online sessions per day

6-8 October, 2021 - Measuring Torque Correctly

Torque is the most demanding of all mechanical measured variables, since it is composed of two basic mechanical variables. In addition, the torque sensor usually measures under rotation, which places high demands on the assembly. The user therefore requires a high degree of knowledge and experience in theory and practice, which you can acquire in this seminar.

Duration: 3 days at 3-hour online sessions per day

11-12 October , 2021 - Perception V8 ePowerSuite - Solution for Optimized Testing of Electric Drives

Take advantage of the full functionality of the HBM ePowerSuite testing system within the new Perception version 8 for power analysis and measurement, data acquisition and analysis on electric drives and inverters. This seminar puts you in a position to use the system quickly and safely in all its applications.

Duration: 2 consecutive days / 3,5 hours parts

18-21 October, 2021 - Electric motor fundamentals, understanding your drive

In this seminar you will get a broad overview over the fundamental principles of different electrical machines and inverters. We will show you detailed measurements, that will help you understanding your drive line. Finally, after analyzing the measurements in the seminar, you will be able to even optimize your system.

Duration: 4 days at 3½-hour online sessions per day

8-10 November, 2021 - Online-Seminar: Fundamentals of Weighing Technology

Learn from the global leader in weighing technology how you can set up and operate your weighing technology applications professionally and efficiently while ensuring a long service life.
Duration: 3 consecutive days / 3,5 hours parts

15-17 November, 2021 - Working with catman / Basic Seminar

Our online seminar provides you with a fast and efficient introduction to the catman data acquisition software. At the beginning of the seminar you will dial into one of our training computers. After the explanations from the trainer you can then experience the individual fuctions of the software step by step from your PC with our equipment.

Duration: 3 days at 3-hour online sessions per day

17-20 November, 2021 - eDrive Testing Solution for Optimized Testing of Electric Drives

Take advantage of the full functionality of the HBM eDrive Testing system for power analysis and measurement, data acquisition and analysis on electric drives and inverters. This seminar puts you in a position to use the system quickly and safely in all its applications.

Duration: 4 consecutive days / 3 hours parts

23-25 November, 2021 - Working with catman / Advanced-Seminar

Finally, unleash the full functionality of catman! If you want to automate your measurements, design and optimize them, generate complex analyses with them and become familiar with the complete catman range, this seminar is for you!

Duration: 3 days at 3-hour online sessions per day

30 Nov. - 3 Dec., 2021 - Measuring with Strain Gauges - Planning, Performing and Evaluating (DM)

In this advanced online course to become a strain gauge measurement professional, we will teach you how to perform correct measurements with strain gauges. Learn about the correct compensation of temperature effects, different connection variants of strain gauges, and much more. By completing this seminar, you will gain confidence in instrumentation and performing of measurements with strain gauges. Our trainers will teach you online and will be available for all your questions

Duration: 4 days at 3-hour online sessions per day

7-9 December, 2021 - Experimental Stress Analysis for Component Assessment

This seminar provides the theoretical and practical knowledge required for a confident experimental stress analysis, which can be used for verification of FEM models.

Duration: 3 days at 3½-hour online sessions per day

Durability and Fatigue Engineering courses (Prenscia)

Reliability and maintainability engineering courses (Prenscia)

18-27 january , 2021 - Fundamentals of Reliability (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 7 days (3-hour sessions)

19-22 january , 2021 - nCode GlyphWorks: Signal Processing and Test Data Analysis (Online)

nCode GlyphWorks: Signal Processing and Test Data Analysis provides an overview of data analysis techniques and offers instructor-led sessions where you will learn how to use nCode GlyphWorks software to quickly and efficiently turn raw data into actionable information.

Duration: 4 days (3-hour sessions)

25-26 january , 2021 - nCode GlyphWorks: Accelerated Durability Testing (Online)

provides an overview of analysis techniques and offers hands-on sessions where you will learn how to create accelerated durability test specifications using nCode GlyphWorks software.

Duration: 2 days (3-hour session)

1-4 February , 2021 - nCode DesignLife: Fatigue Analysis using FEA Results (Online)

nCode DesignLife: Fatigue Analysis using FEA Results provides an overview of fatigue life prediction techniques and offers instructor-led sessions where you will learn how to use nCode DesignLife software to perform fatigue analysis using stresses from computer aided engineering (CAE) tools.

Duration: 4 days (3-hour sessions)

8-9 February , 2021 - nCode DesignLife: Fatigue Analysis of Dynamic Structures (Online)

Resonance and dynamic effects can lead to large stress cycles that can be very damaging and reduce product life. This instructor-led online course investigates fatigue life prediction techniques specific to structures that experience dynamic stresses and explores methods that account for the critical interaction between dynamic excitation and structural response.

Duration: 2 days (3-hour sessions)

10-11 February , 2021 - nCode DesignLife: Fatigue Analysis of Welded Structures (Online)

Welding is a commonly used and effective method of joining materials such as metals.

Duration: 2 days (3-hour sessions)

22-25 February , 2021 - Accelerated Life Testing Analysis (Online)

Accelerated Life Testing Analysis covers the benefits, limitations, theory and procedure behind several proven accelerated test analysis methods.

Duration: 4 days (3-hour sessions)

1-10 March , 2021 - System Reliability and Maintainability Analysis (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 6 days (3-hour sessions)

8-11 March , 2021 - nCode GlyphWorks: Signal Processing and Test Data Analysis (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 4 days (3-hour sessions)

8-17 March , 2021 - Fundamentals of Reliability (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 7 days (3-hour sessions)

9-12 March, 2021 - nCode GlyphWorks: Signal Processing and Test Data Analysis (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 4 days (3-hour sessions)

15-24 March, 2021 - Reliability for Product Development (Online)

This course expands on Fundamentals of Reliability concepts, focusing on hands-on application of reliability analysis tools at the appropriate stages of the product development cycle.

Duration: 6 days (3-hour sessions)

15-16 March, 2021 - nCode GlyphWorks: Accelerated Durability Testing (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat.

Duration: 2 days (3-hour session)

15-18 March, 2021 - Practical Fatigue Theory (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 4 days (3-hour sessions)

15-18 March, 2021 - nCode DesignLife: Fatigue Analysis using FEA Results (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 4 days (3-hour sessions)

16-19 March, 2021 - nCode DesignLife: Fatigue Analysis using FEA Results (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 4 days (3-hour sessions)

22-25 March, 2021 - nCode DesignLife: Fatigue Analysis using FEA Results (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 4 days (3-hour sessions)

23-24 March, 2021 - nCode DesignLife: Fatigue Analysis of Dynamic Structures (Online)

Resonance and dynamic effects can lead to large stress cycles that can be very damaging and reduce product life.

Duration: 2 days (3-hour sessions)

25-26 March, 2021 - nCode DesignLife: Fatigue Analysis of Welded Structures (Online)

Welding is a commonly used and effective method of joining materials such as metals.

Duration: 2 days (3-hour sessions)

30 March-2 April, 2021 - Accelerated Life Testing Analysis (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 4 days (3-hour sessions)

12-15 April, 2021 - Accelerated Life Testing Analysis (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 4 days (3-hour sessions)

12-15 April, 2021 - nCode GlyphWorks: Signal Processing and Test Data Analysis (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 4 days (3-hour sessions)

19-28 April, 2021 - Fundamentals of Reliability (Online)

Fundamentals of Reliability provides a solid foundation of the methods, analyses, applications and associated tools in reliability engineering mathematics -- from basic data analysis and modeling to advanced methods and concepts.

Duration: 7 days (3-hour sessions)

19-22 April, 2021 - nCode GlyphWorks: Signal Processing and Test Data Analysis (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 4 days (3-hour sessions)

19-20 April, 2021 - nCode VibeSys: Vibration, Frequency, and Acoustic Analysis

nCode VibeSys: Vibration, Frequency, and Acoustic Analysis (Online) provides an overview of vibration data analysis techniques and offers hands-on sessions where you will learn how to use nCode VibeSys software to quickly and efficiently turn measured vibration and acoustics data into actionable information.
Duration: 4 days (3-hour sessions)

26-29 April, 2021 - nCode DesignLife: Fatigue Analysis using FEA Results (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 4 days (3-hour sessions)

26 April-5 May, 2021 - Reliability for Product Development (Online)

This course expands on Fundamentals of Reliability concepts, focusing on hands-on application of reliability analysis tools at the appropriate stages of the product development cycle.

Duration: 6 days (3-hour sessions)

3-4 May, 2021 - Correlating CAE Results with Test Data (Online)

Experimental testing has historically helped engineers evaluate component performance and estimate a product’s functional life.

Duration: 2 days (3-hour sessions)

4-5 May, 2021 - nCode DesignLife: Fatigue Analysis of Dynamic Structures (Online)

Resonance and dynamic effects can lead to large stress cycles that can be very damaging and reduce product life.

Duration: 2 days (3-hour sessions)

4-5 May, 2021 - nCode GlyphWorks: Accelerated Durability Testing (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 2 days (3-hour session)

6-7 May, 2021 - nCode DesignLife: Fatigue Analysis of Welded Structures (Online)

Welding is a commonly used and effective method of joining materials such as metals.

Duration: 2 days (3-hour sessions)

10-13 May, 2021 - Accelerated Life Testing Analysis (Online)

Accelerated Life Testing Analysis covers the benefits, limitations, theory and procedure behind several proven accelerated test analysis methods.

Duration: 4 days (3-hour sessions)

11-12 May, 2021 - Correlating CAE Results with Test Data (Online)

Experimental testing has historically helped engineers evaluate component performance and estimate a product’s functional life.

Duration: 2 days (3-hour sessions)

17-26 May, 2021 - System Reliability and Maintainability Analysis (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat.

Duration: 6 days (3-hour sessions)

18-21 May, 2021 - nCode GlyphWorks: Signal Processing and Test Data Analysis (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat.

Duration: 4 days (3-hour sessions)

24-27 May, 2021 - Practical Fatigue Theory (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 4 days (3-hour sessions)

25-26 May, 2021 - nCode GlyphWorks: Accelerated Durability Testing (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat.

Duration: 2 days (3-hour session)

7-16 June, 2021 - Foundations for Effective FMEAs (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 6 days (3-hour sessions)

7-16 June, 2021 - Fundamentals of Reliability (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 7 days (3-hour sessions)

14-17 June, 2021 - nCode DesignLife: Fatigue Analysis using FEA Results (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 4 days (3-hour sessions)

21-22 June, 2021 - nCode DesignLife: Fatigue Analysis of Dynamic Structures (Online)

Resonance and dynamic effects can lead to large stress cycles that can be very damaging and reduce product life.

Duration: 2 days (3-hour sessions)

21-30 June, 2021 - System Reliability and Maintainability Analysis (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 6 days (3-hour sessions)

28 June-7 July, 2021 - RAM for Asset Management (Online)

RAM for Asset Management provides an overview of the ways in which reliability engineering concepts and methods can be applied for repairable systems analysis and maintenance planning.

Duration: 7 days (3-hour sessions)

12-15 July, 2021 - Accelerated Life Testing Analysis (Online)

Accelerated Life Testing Analysis covers the benefits, limitations, theory and procedure behind several proven accelerated test analysis methods.

Duration: 4 days (3-hour sessions)

19-20 July, 2021 - nCode GlyphWorks: Accelerated Durability Testing (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 2 days (3-hour session)

26 July-4 August, 2021 - System Reliability and Maintainability Analysis (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 6 days (3-hour sessions)

9-18 August, 2021 - Reliability Growth Analysis (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via video, audio, and chat. See course calendar for available dates and times.

Duration: 6 days (3-hour sessions)

13-22 September, 2021 - Fundamentals of Reliability (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 7 days (3-hour sessions)

21-24 September, 2021 - Practical Fatigue Theory (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 4 days (3-hour sessions)

4-7 October, 2021 - Accelerated Life Testing Analysis (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 4 days (3-hour sessions)

11-14 October, 2021 - nCode DesignLife: Fatigue Analysis using FEA Results (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 4 days (3-hour sessions)

18-21 October, 2021 - nCode GlyphWorks: Signal Processing and Test Data Analysis (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 4 days (3-hour sessions)

25-26 October, 2021 - Correlating CAE Results with Test Data (Online)

Experimental testing has historically helped engineers evaluate component performance and estimate a product’s functional life.

Duration: 2 days (3-hour sessions)

1-4 November, 2021 - Accelerated Life Testing Analysis (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 4 days (3-hour sessions)

9-10 November, 2021 - nCode VibeSys: Vibration, Frequency, and Acoustic Analysis

nCode VibeSys: Vibration, Frequency, and Acoustic Analysis (Online) provides an overview of vibration data analysis techniques and offers hands-on sessions where you will learn how to use nCode VibeSys software to quickly and efficiently turn measured vibration and acoustics data into actionable information.

Duration: 2 days (3-hour sessions)

6-15 December, 2021 - RAM for Asset Management (Online)

RAM for Asset Management provides an overview of the ways in which reliability engineering concepts and methods can be applied for repairable systems analysis and maintenance planning.

Duration: 7 days (3-hour sessions)

13-22 December, 2021 - System Reliability and Maintainability Analysis (Online)

Prenscia Academy Online courses are delivered in real-time with an instructor available to answer questions and assist via audio or chat. See course calendar for available dates and times.

Duration: 6 days (3-hour sessions)

Sound & Vibration courses (Brüel & Kjær)