HBK Digital Learning Package

REGISTER NOW

Upcoming webinars

June 22, 2021 - 2250 and ISO 16283 (Building Acoustics)

Learn how to carry out sound and impact insulation measurements with your 2250 meter that meet ISO 16283 standards.

June 22, 2021 -Understanding and Improving the Performance, Durability and Reliability of Electric Vehicles

June 22, 2021 at 4 PM (Berlin CEST) in English Language

June 24, 2021 - Reliability and Maintainability Solutions in Warehouse Operations: Best Practices for Same-Day Delivery with ReliaSoft Software

Does the same day delivery present you with operational challenges? Or is it an option you are striving to achieve? Delivery time is an important factor for customers during the product selection process, where up to 65% of the delivery time is spent during the pick up and packaging processes.

June 24, 2021 -Mechanical and Durability Aspects of Electric Vehicles

Like their thermal-engine counterparts, electric vehicles are susceptible to structural fatigue failures. The mechanical complexity of the battery structure and its mountings also give rise to significant additional fatigue failure issues. Insights into these structural and vibration-induced failures enable engineers to reduce the risk of fatigue failure, improve the durability of electric-engines, and increase vehicle reliability.

June 29, 2021 - BK Connect™

Join this webinar for a thorough introduction to our data analysis software, BK Connect.

June 29, 2021 - Matron User: Introduction and Advice

Advice for users on setting up the equipment, understanding measurement settings, downloading to pc and listening to sound recordings on noise nuisance measurements.

June 29, 2021 -Performance and Efficiency Aspects of Electric Vehicles

The theoretical and real-world range of an electric vehicle may vary significantly. To maximize the range and overall efficiency of the vehicle, it is necessary to understand and characterize how the vehicle will be used and determine through meticulous

June 29, 2021 - Introduction to Reliability Block Diagrams Using ReliaSoft BlockSim

During this webinar attendees learn how to perform system reliability analysis based on existing life data of subsystems, components and/or failure modes. This is beneficial to drive better business decisions regarding design/process improvement initiatives, cost/benefits tradeoffs,

June and July 2021 Weekly Sessions - Solutions for High Voltage Battery Measurement, Testing and Data Validation in Modern NEV / BEV

Join our experts for this series and register for the sessions that interest you

July 1, 2021 - Statistical and Reliability Aspects of Electric Vehicles

All electric vehicle battery performance degrades over time. Their performance, however, varies by model and external conditions such as use, temperature, and charging methods. To improve the overall reliability of the battery system and avoid excessive

July 6, 2021 - Basic 2250 Sound Level Meter

A general introduction to the Type 2250 Sound Level Meter for users new to the instrument.

July 8, 2021 - Material Testing and Fatigue Characterisation for Fatigue of Welds in nCode DesignLife

Welding is a commonly used and effective method for making structural joints between metal parts. However, the nature of the welding process means that these weldments generally have a fatigue strength that is inferior to that of the parts being joined together.

July 13, 2021 - Advanced 2250 and 2270 Sound Level Meter

Join this open forum for Type 2250 and 2270 owners to learn how to get the best from your sound level meter.

July 15, 2021 - Introduction to Degradation Analysis

The increasing reliability and shorter development times of modern products can make calculating the reliable life of a given product within the necessary timeframe difficult, even when accelerating stresses.

July 15, 2021 - A Practical Use Case for Accelerated Degradation Analysis: Implementation, Challenges, and Results using ReliaSoft Software

Increased reliability and shorter development times of products make calculating the reliable life of a given product within the necessary timeframe difficult, even when using accelerating stresses. One of the options in such situation is to use of the degradation analysis

July 20, 2021 - Measurement Partner Suite

Introduction to our Measurement Partner Suite covering data management and transfer, display, archives, export and post-processing.

July 20, 2021 -Vibration Testing Live Batteries During Charge/Discharge Cycling

Electrification of vehicles is growing exponentially with green initiatives paving the way, but to ensure the longevity and wider commercial success the technology needs to be able to perform well enough as an alternative and be safe

July 21, 2021 -Rail Vehicle Moving Source Beamforming

Beamforming is an array-based measurement technique for the localisation of noise sources. This method is often used on stationary (fixed) sources,

July 27, 2021 - B&K 2245 Sound Level Meter Introduction

B&K 2245 is the latest in our range of iconic sound level meters providing a complete solution for basic noise measurements, while combining functionality, ease-of-use and versatility with the reliability and confidence that is ensured with the Brüel & Kjær brand.

July 28, 2021 - What's New in BK Connect 2021/PULSE 25

With the release of BK Connect 2021.0 and PULSE 25 come new and exciting features designed to support the overall workflow from acquisition to report.

July 29, 2021 - An Introduction to BK Connect Indoor Pass-by and Pass-by SPC

Although vehicle pass-by noise is normally associated with an outdoor test on a test track, much of the design and development work can be done more efficiently indoors on a chassis dyno in a hemi-anechoic room.

August 18, 2021 - What's New in BK Connect 2021/PULSE 25

With the release of BK Connect 2021.0 and PULSE 25 come new and exciting features designed to support the overall workflow from acquisition to report

August 19, 2021 - An Introduction to BK Connect Indoor Pass-by and Pass-by SPC

Although vehicle pass-by noise is normally associated with an outdoor test on a test track, much of the design and development work can be done more efficiently indoors on a chassis dyno in a hemi-anechoic room

September 7, 2021 - Building Acoustics

A introduction in how to make Sound and Impact Insulation measurements to current standards.

September 13, 2021 - Modal Analysis and Correlation

A presentation of Brüel & Kjaer's current offering for conducting experimental modal tests and correlation with mathematical model results (FEM).

September 14, 2021 - Environmental Measurements with 2245

Join this webinar to learn how to make environmental measurements with the B&K 2245 sound level meter which provides a complete solution for basic noise measurements.

September 15, 2021 - catman Enterprise - Thousands of Channels at a Glance

Do you need to measure 1000's of channels? Does your test last for days or even years? And would you like to visualize measurement data dynamically on multiples PC's across a network during data acquisition? Perhaps you also need to measure at low to midrange frequencies or check if your data follow established prediction lines?

September 17, 2021 - Management and calculation programs for noise measurements made with sound level meters

Introduction to the noise measurement calculation and management programs performed with the B&K 2245, 2250 Light, 2250 and 2270 sound level meters.

September 21, 2021 - Noise at Work Measurements With 2245

This solution for B&K 2245 Sound Level Meter is a complete, focused toolset for measuring occupational noise-related concerns, such as noise exposure surveys and risk mitigation for noise-induced hearing loss.

September 21, 2021 -Improve your Fatigue Analysis with Accurate Materials Data

A critical element in product development is the ability to accurately predict the fatigue life of an engineered component. High quality materials data is a vital part of understanding how fatigue damage accumulates, but is often overlooked and can often be difficult to obtain. This webinar focuses on improving your fatigue simulations

September 28, 2021 - 2250 and ISO 16283 (Building Acoustics)

Learn how to carry out sound and impact insulation measurements with your 2250 meter that meet ISO 16283 standards.

October 1, 2021 - Vibration Control I. Sinus

Seminar aimed at the practical introduction to Sine control of vibrations, units, basic control parameters, creation of profiles.

October 4, 2021 - Piezoelectric accelerometers

Seminar for piezoelectric celerometers: theory, practical questions, common errors and special models . At the end of the seminar the questions will be answered.

October 5, 2021 - Sound Intensity

The use of sound intensity rather than sound pressure to determine sound power means that measurements can be made in situ with steady background noise and in the near field of machines.

October 5, 2021 - BK Connect™

Join this webinar for a thorough introduction to our data analysis software, BK Connect.

October 8, 2021 - Vibration Control II. Random

Seminar for a practical introduction to Random control of vibrations, units, basic control parameters, profiling, shaker and test configuration parameters, report generation.

October 12, 2021 - Matron User: Introduction and Advice

Advice for users on setting up the equipment, understanding measurement settings, downloading to pc and listening to sound recordings on noise nuisance measurements.

October 15, 2021 - Vibration Control III. Shock

Seminar for the practical introduction to the control of Classic Shock tests, units, basic control parameters, Waveform and Profile, Compensations

October 18, 2021 - API for LAN XI modules and 2245 sound level meter

In this webinar you will learn how to manage the configuration of your equipment in a multi-platform environment (Windows, Linux, Mac, etc.)

October 19, 2021 - Basic 2250 Sound Level Meter

A general introduction to the Type 2250 Sound Level Meter for users new to the instrument. It will cover using the meter to make measurements and transfer the results to a PC.

October 22, 2021 - Useful tips in vibration tests

Repetition of the webinar given on April 7 in which we will be reminded of the most effective and safe guidelines to avoid making mistakes during vibration tests.

October 25, 2021 - Locating Noise Sources with Array, BK Connect Acoustic Camera

A presentation of our wide range of systems and techniques for locating noise sources with a microphone array. We will place particular emphasis on the PULSE BK Connect Acoustic Camera Acoustic Camera solution.

October 29, 2021 - A General Introduction to the 2250 Sound Level Meter for New Users

A general introduction to the 2250 sound level meter for new users of this powerful acoustic analyzer.

November 2, 2021 - Advanced 2250 and 2270 Sound Level Meter

Join this open forum for Type 2250 and 2270 owners to learn how to get the best from your sound level meter.

November 5, 2021 - Sound power with B&K 2245 sound level meter and Product Noise Partner

In this webinar we present the B&K 2245 sound level meter with the Product Noise Partner application, a solution for calculating sound power

November 9, 2021 - Measurement Partner Suite

Introduction to our Measurement Partner Suite covering data management and transfer, display, archives, export and post-processing.

November 12, 2021 - BK Connect Team Server

Following the new free version in local mode of BK Connect Team Server, this webinar will allow you to know the advantages of this tool, both in its local and network versions.

November 16, 2021 - Building Acoustics

A introduction in how to make Sound and Impact Insulation measurements to current standards.

November 18, 2021 - Handling of 2250/2270 sound level meters

Seminar for the knowledge of the management of the 2250 platform measurement programs, such as sound level meter

November 19, 2021 - Presentation of the B&K 2245 sound level meter: Work done, approved in Spain

The B&K 2245 is the latest in our range of legendary sound measurement equipment that provides a complete solution for basic noise measurements

November 22, 2021 - Measurement microphones

Explain the theory of measurement microphones. Ideal for all those who are new to acoustic measurements, but also for experienced engineers

November 23, 2021 - B&K 2245 Sound Level Meter Introduction

B&K 2245 is the latest in our range of iconic sound level meters providing a complete solution for basic noise measurements, while combining functionality, ease-of-use and versatility with the reliability and confidence that is ensured with the Brüel & Kjær brand.

November 26, 2021 - Advanced features of the 2250 and 2270 sound level meters

Join this seminar designed for users of the 2250 and 2270 sound level meters to learn how to get the most out of your sound level meter.

November 29, 2021 - Low Cost Acquisition Systems: BK Connect Applets

This seminar will present the new LAN XI Light 3676 hardware which, together with the different software applications (BK Connect Applets)

December 13, 2021 - Measurement of vibrations in human body and buildings

A vision of the solutions proposed for vibration measurements in buildings (ISO 2631-2) and human body (ISO-2631-1).